Quick Quote ↗

CONTAINER LIDS & CLOSURES

Aluminum Foil Container LidsFoil · Board · PET · PP · Film

A lid that does not fit is the most common packaging complaint in foodservice, and it is almost always a tooling problem rather than a packing problem. We make lids as a matched part of our container range — foil lids, laminated board (paper) lids, PET and PP lids, plus heat-seal film — each one tooled to a specific container rim and confirmed against your container before the bulk run.

Get Factory QuoteRequest Free Samples
Free stock lid samples; send your container drawing for a fit check.
Aluminum Foil Containers with Lids (230×230×38mm)Round Aluminum Foil Pans with Lids (234×46mm)Aluminum Foil Pan with Lid (430×310×65mm)
16Production Lines
200+Molds
100–120 tMonthly Output
39Export Countries

Lid Types We Manufacture

Closure options matched to round, rectangular and steam-table containers.

200+ MOLDS / LIDDED MODELS

Explore lidded container models

Lidded container pairs from stock moulds. Filter or search by capacity, then confirm the lid material you need.

8 selected models

Aluminum Foil Containers with Lids (230×230×38mm)

037﹒IVC

Capacity
1500 ml
Size
230 x 230 mm
Packing
200 pcs/carton

Aluminum Foil Containers with Lids (230×230×38mm)

View Details
Round Aluminum Foil Pans with Lids (234×46mm)

R09-FC

Capacity
1400 ml
Packing
500 pcs/carton

Round Aluminum Foil Pans with Lids (234×46mm)

View Details
Aluminum Foil Pan with Lid (430×310×65mm)

018-IVC

Capacity
5500 ml
Size
430 x 310 mm
Packing
50 pcs/carton

Aluminum Foil Pan with Lid (430×310×65mm)

View Details
1500ml Smoothwall Aluminum Foil Container

KC901-1-1

1500ml Smoothwall Aluminum Foil Container

View Details
1000ml Smoothwall Aluminum Foil Container

S1610M-1

Packing
1000 pcs/carton

1000ml Smoothwall Aluminum Foil Container

View Details
2000ml Smoothwall Aluminum Foil Container

SR250S

Capacity
2000 ml
Packing
500 pcs/carton

2000ml Smoothwall Aluminum Foil Container

View Details
3000ml Smoothwall Aluminum Foil Container

SR250M

Capacity
3000 ml
Packing
500 pcs/carton

3000ml Smoothwall Aluminum Foil Container

View Details

Dimensions shown are top outer dimensions and height. MOQ, alloy, thickness, lid compatibility and loading quantities are confirmed for each order.

Request Model Selection

Why lid fit decides packaging quality

Closure performance comes from the container and the lid together — check each point against your packing line.

Lid tooled to the container

Each lid is made for one rim profile, so the fit stays consistent between batches.

Foil, board, PET or PP

The material is chosen around heat, product visibility and transport requirements.

Leak-resistant closures

Crimped foil and tight board lids keep sauces inside during delivery.

Board lids for branding

Laminated board takes full-colour print for retail and foodservice branding.

PET domes for display

Clear lids show the product at deli, salad and dessert counters.

Heat-seal film option

A film seal gives the tightest closure on trays with a sealing flange.

Stacking height controlled

Lid height is agreed so carton and pallet plans stay predictable.

Recyclable options

Mono-material aluminum and board lids support recycling targets.

CUSTOMIZATION & OEM

Specify the closure

Choose the lid material and print around the container you already buy.

MATERIAL

Match the lid material

Foil, laminated board, PET, PP or sealing film — the choice follows the container and its heat or display requirement.

  • Lid material recommended for your container
  • Board weight and foil thickness agreed
  • Fit confirmed by sample
Explore OEM Options
2100ml Aluminum Foil Container (4 lb, 315×215×50mm)345ml Smoothwall Aluminum Foil Roasting Tray

COLOR

Plain, printed or coloured

Plain silver foil, white or coloured board, and full-colour printed lids for retail presentation.

  • Plain, coloured or printed
  • Print up to full colour
  • Sample approved before the run
Explore OEM Options
345ml Smoothwall Aluminum Foil Roasting Tray2000ml Smoothwall Aluminum Foil Container

LOGO

Print your brand on the lid

A printed lid puts your logo on the most visible part of the pack, where the buyer reads it.

  • Artwork and print area review
  • Up to full-colour printing
  • Physical proof approved first
Explore OEM Options
450ml Smoothwall Aluminum Foil Tray

LID

Match the closure method

Crimp, snap-fit or sealed — the closing method has to suit your filling process and the way the pack travels.

  • Crimp, snap or sealed fit
  • Leak and closure checks
  • Sealing equipment compatibility
Explore OEM Options
Aluminum Foil Pan with Lid (430×310×65mm)

PACKAGING

Pack lids for your line

Lids are packed flat or nested in counts that suit manual or automatic lidding.

  • Flat or nested packing
  • Counts per pack agreed
  • Export cartons and pallets
Explore OEM Options
ALKONCE sorting and packaging area

Where matched lids matter

Industries where the lid, not the container, decides whether you get a complaint.

Takeaway & delivery

Crimped or snap-fit lids stop leaks in courier bags.

Supermarket ready meals

Printed board lids carry the branding on the shelf.

Deli & display counters

PET domes show the product and stack cleanly.

Catering & buffet

Board and foil lids keep batch pans covered in service.

Bakery & pastry

Lids protect fragile bakes during delivery.

Frozen food

Tight closures protect the product against freezer burn.

YOUR ORDER

From container drawing to lid approval

A fit-first approval path for lid orders.

  1. STEP 01

    Send your container details

    A drawing or sample, plus the lid type you are considering.

  2. STEP 02

    Match the lid mould

    We identify the existing lid tool for that rim, or quote a new one.

  3. STEP 03

    Confirm material and print

    Foil, board, PET or PP, plus artwork and printable area.

  4. STEP 04

    Approve the lid sample

    Check fit, closure and print quality on your own container.

  5. STEP 05

    Mass production & QC

    Lid dimensions and print are checked against the approved sample.

  6. STEP 06

    Load & ship

    Flat-packed cartons, counts and documents confirmed before dispatch.

Request a Lid Fit Check
ALKONCE aluminum container production workshop

MANUFACTURING CAPABILITY

Built in-house. Controlled from mould to shipment.

Lids are produced and packed alongside the containers they match, so a rim and lid pair leaves the factory working to one dimensional standard.

  • 16 production lines
  • 200+ existing molds
  • 100–120 tons monthly output
Explore Our Factory

QUALITY & DOCUMENTATION

Lid documentation

Ask for the material and food-contact documentation relevant to your lid, container and destination market.

FACILITY DOCUMENTATION

FDA registration

Request the facility registration document. Registration is not product approval.

View Quality Documentation

TEST DOCUMENTATION

SGS reports

Request the report, tested sample and scope. Confirm which requirements apply to your product.

View Quality Documentation

Which lid fits your container?

Compare the closure options, then confirm the fit against your actual container.

Foil, board and plastic lid options compared.
Buying considerationFoil lidBoard (paper) lidPET / PP lid
Fit methodCrimped over the rimTucked or snap-on rimSnap-fit or push-on
BrandingEmbossed or printed foilFull-colour printed boardUsually unprinted
Heat useOven-safe with the containerConfirm the heat limitsNot for oven use
VisibilityOpaqueOpaqueClear for product display
Best forTakeaway, catering, bakeryRetail and catering brandingDeli, salad and dessert counters
Recycling streamAluminumPaper and boardPlastic

Your purchasing questions, answered

A practical starting point for importers, distributors and food brands.

What is your MOQ for aluminum foil container lids?

MOQ depends on lid type, diameter and print. Plain foil and board lids from stock tools start lower; custom print or special shape needs a larger run.

Can I get free samples of aluminum foil container lids?

Yes. Stock foil, board, PET and PP lid samples are available for fit check; freight is arranged separately.

Can you develop custom molds for aluminum foil container lids?

Yes. Send the container rim drawing or sample and the lid function you need. We quote tooling for foil, board or plastic lids.

What materials do you use for container lids?

Aluminum foil, laminated board (paper), PET and PP. Material choice depends on the container, sealing method and use temperature.

Can you print our logo on container lids?

Yes. Foil and board lids can be printed with your logo or pattern. We confirm artwork, colours and approve a printed sample.

What container series do your lids match?

Our lids are tooled to match round, rectangular, smoothwall, wrinklewall and airline container series. Send the container size for a fit confirmation.

What is the production lead time for aluminum foil container lids?

Usually 15–25 days after sample approval. Matched container-and-lid orders are scheduled together when possible.

Can you supply private-label packaging for aluminum foil container lids?

Yes. Lids can be packed in printed cartons, dispenser boxes or counted bags to your specification.

How many pieces fit in a 40HQ container for aluminum foil container lids?

Loading depends on lid type, diameter, nesting, case count and pallet plan. We prepare a 40HQ estimate once the mix is confirmed.

Do you provide food-contact documentation for aluminum foil container lids?

Yes. Material certificates and food-contact reports are available for foil, board, PET and PP lids, checked against your market rules.

Need lids that actually fit?

Send your container drawing or sample and the closure you need. We will confirm a matching lid mould.

Get Factory QuoteRequest Free Samples
Browse Selected Molds

Ask For A Quick Quote

We will contact you within 1 working day, please pay attention to the email with the suffix “@koncenlnc.com”. 

Free sample

Contact us , you will Get FREE SAMPLE for reference!!!